Hinge 8 40 Zn, black

Suitable for higher loads, e.g. large machine doors and doors for guard units, and as compact connecting element for profiles positioned at various angles. Hinges 8 Zn are suitable for right-hand and left-hand application. Fastening is possible on the outer surfaces or end faces of profiles (using either slots or ⌀ 8 mm centre hole).
Integrated anti-torsion pins to provide additional stability in the groove.

If required, e.g. when fitting to a panel element, the anti-torsion pin should be removed with a screwdriver.


Attaching Hinge 8 40 Zn to the profile grooves of Line 8.


Hinge 8 40 Zn can be screw-connected to the end face or to the profile groove.