This website uses cookies to enhance your experience.

Mitre-Fastening Set 6

Item No. 0.0.627.12
0 reviews Write a review
Fasten together mitre-cut aluminum extrusion profiles with ease. Ideal for protective hoods, partitions and enclosures. 1. Mitre-cut profile desired angle. 2. Drill a counterbore (⌀ 9.1 mm, depth 21 mm – Drill 0.0.628.25) for the fastener sleeve into the side of the mitre-cut profile (use of
Price
$9.12
price per set
excl. tax
set
This product cannot be ordered at the moment.

Ships Same Day if Ordered By 3 p.m MST Monday – Friday! 

Description
Fasten together mitre-cut aluminum extrusion profiles with ease. Ideal for protective hoods, partitions and enclosures.

1. Mitre-cut profile desired angle.
2. Drill a counterbore (⌀ 9.1 mm, depth 21 mm – Drill 0.0.628.25) for the fastener sleeve into the side of the mitre-cut profile (use of drilling jig 0.0.616.77 recommended).
3. Drill a hole (⌀ 5.5 mm – Drill 0.0.628.55) into the mitred face of the profile (use of drilling jig 0.0.616.89 recommended). Minimum hole depth: 15 mm.
4. Insert the T-Slot Nut into the profile groove of the continuous profile and screw in the clamping pin until the mark around the perimeter is level with the profile surface.
5. Insert the fastener sleeve into the counterbore of the mitred profile and fit the assembly over the clamping pin.
6. Drive grub screw M6 into the fastener sleeve and clamp the profile connection (M = 3.5 Nm).


 Set Includes:
 Clamping pin M5x23, St, bright zinc-plated
 Sleeve with bore, St, bright zinc-plated
 Grub screw M6, St, bright zinc-plated
 T-Slot Nut 6 St M5, bright zinc-plated 

Reviews (0)
There are no reviews yet.
    Loading
    Loading