This website uses cookies to enhance your experience.

Central-Fastening Set 8,

Item No. 0.0.494.15
0 reviews Write a review
Central-Fastening Set 8 is particularly well suited for right-angled connections between Line 8 t-slot aluminum extrusion profiles and can be used when constructing protective enclosures and partitions. Central-Fastening Set 8 is useful if the profile grooves of a construction facing each other are
Price
$6.70
price per set
excl. tax
set
This product cannot be ordered at the moment.

Ships In 1 Business Day!

Description
Central-Fastening Set 8 is particularly well suited for right-angled connections between Line 8 t-slot aluminum extrusion profiles and can be used when constructing protective enclosures and partitions.
Central-Fastening Set 8 is useful if the profile grooves of a construction facing each other are to accommodate a panel element. Since the groove area remains free with this fastening set, no special machining of the panel element in the corner area is required.
Central-Fastening Set 8 is thus a particularly cost-effective means of making a profile connection.


How to use Central-Fastening Set 8:
1. Cut a countersink ⌀ 14.2 mm for the fastener sleeve into the side of the profile to be connected on its end face. The distance between the hole and the end face of the profile is 12 mm and the depth of the countersink 26.7 mm.
Use of item Drilling Jig 0.0.493.72 and Step Drill D14.2 (Art. No. 0.0.492.60) is recommended.2. The core bore of the profile is cut into the end face
(⌀ 8.2 mm; 20 mm deep). The bore must then be deburred.3. Insert the clamping pin into the groove of the continuous profile.
4. Insert the fastener sleeve into the countersink
⌀ 14.2 mm, introduce the clamping pin and make the profile connection.5. Drive grub screw M10 into the fastener sleeve and clamp the profile connection (M = 15 Nm).
6. Fit the cap onto the fastener sleeve.
Due to the reduced clamping force and the lack of any anti-torsion feature between the profiles, this fastening set should only be used in combination with panel elements in the profile groove and only for profile connections subject to low loads. Where more stringent requirements need to be satisfied and parts are important for safety considerations, it is advisable to use the proven fastening techniques for basic constructions (Standard-Fastening, Universal-Fastening or Automatic-Fastening Sets).


 Set Includes:
 Clamping pin, St, bright zinc-plated
 Clamping spring, St, stainless
 Sleeve with bore, St, bright zinc-plated
 Grub screw M10, St, bright zinc-plated
 Cap, PA grey 

Reviews (0)
There are no reviews yet.
    Loading
    Loading